Look here, for VXDIAG user V83 *** /, V94SE, S94BM, S94JL, V71XN***** , V83XD***** , V94XD**** The SE series and VXDIAG DOIP: When you want to get Remote Assistance diagnosis, programming/coding from VXDIAG engineer there, first follow these instructions to set DoNet.
Prepare:
– A mobile phone which support “HotSpot”.
– vxdiag device (VXDIAG VCX SE or VXDIAG VCX DOIP).
– A car. (Porsche 2, Porsche 3 (Doip), BMW (Doip), Mercedes-Benz (Doip), Ford, Mazda, GM (Chevrolet, Buick, GMC, Cadillac, Holden, Opel, Vauxhall Pontiac, Hummer, Saab , Saturn) VAG (VW, AUDI, Seat, Skoda, Bentley, Lamborghini) Land Rover, Jaguar, Subaru, Volvo )
– One computer (No operation system limitation)
– Open www.vxdiag.net to download vx manager.
– A pen.
Step3:
Step 1. Set the ” HotSpot” on your phone.
Step 2. Connect network with the vxdiag device.
Step 3. Connect Vxidag Device to PC via DONET.
Let’s start one by one.
Step 1. Set the ” HotSpot” on your phone.
Open “Setting” -> select “Network & Internet” -> “Hotspot &tethering” -> Turn on ” WLAN HotSpot” -> ” Set up WLAN HotSpot” – > Network Name “DiagOnNet”,Password “DiagOnNet”, AP band “2.4 GHz band”.
Click ” Device Configure” to input device serial number, no need active code, click “Save”. Then you will see your device information.If your device is connected to phone HOTSPOT, you will see your device information, and find “DONET Remote ID”, click it to get the ID. Input the ID when you connect device on vx manager.
Step 2. Connect network with the vxdiag device.
- Insert vxdiag device into the OBD2 port of the car, then the device will have power ( in the following image, our engineer connect it to Godiag GT100). Then the WIFI indicator will flash twice and beep and keeps on, means the device is trying to connect the network, you don’t need to do nothing, just wait for a while, it will search network automatically when the wifi indicator flashes again.
- After hearing the vxdiag device beep again, use a pen or tool to hold the “Reset” Button for 3 seconds, then you will hear beep again.
If you have a VXDIAG VCX SE device, press “Fn” Button for 3 seconds.
If you have VXDIAG VCX Multi Tool Device with V71****, please open the device to find the S2 button
- The device will flash again, which means it is connecting to the HotSpot. If the device flashes quickly, means it is connected to the HotSpot successfully, and you will find on HotSpot on the phone.
Step 3. Connect Vxidag Device to PC via DONET.
- Browse www.vxdiag.net, scroll down until you see “VX Manager”, click on it to download and install on your computer.
- Open VX Manager on laptop, since the device is not connected to the computer, you will see “No Device (Auto)”.
- Click on “Remote Diag”, input Remote ID, click on “Refresh device”, wait until it displays the device information, click on “Connect device”, wait until it is connected successfully.
- vx manager will restart automatically. After restart, you will find the device is connected by DONET. You are ready to enjoy remote diagnosis / programming /coding from VXDIAG.
Then you can close vx manager, it would show DoNet connected at the right down corner on the task bar.
Since VXdiag device connected, you can use the car diagnostic software with vxdiag driver installed to work.
For example: DONET remote diagnose BMW via ISTA
Video guide: