VXDIAG Subaru SSMIII ErrorCode 2 Solution?
Problem: I tried to run VXDIAG Subaru SSM III software from patch, but it gave an error “Failed to update the CF application version. ErrCode=2” […]
Month: November 2023
VXDIAG GM “GDS2 is Not Communicating with the Device”
Problem: I got the vxdiag vcx nano gm gds2 software installed, open gds2 to diagnose vehicle, it failed to connect. Error GDS2 is not Communicating with […]
Benz C6 VCI Update License Failed Error Info 8006?
Problem: I had a problem with the Benz C6 VCI. Failed to update firmware and license in vx manager. When update license, it said update […]
VXDIAG Renault Not Detected in VCI Manager?
Problem: I got the Renault clip v219 software installed with the vxdiag vcx se, but vci manager does not see the Renault device. Any solution? […]
How to Install Tech2win from PSA Service Box?
Here is the guide to install GM Opel Tech2win from PSA service box. PSA Group has added the Opel/Vauxhall Tech2win subscription as standard included in […]
Review on Setting up VXDIAG VCX NANO GM with PSA Service Box
Here’s an update on clearing the SHVCS. It’s a latched fault and cannot be cleared with the usual OBD readers. ACDelco no longer works for […]
How to Repair 2012 Volt SHVCS with VXDIAG and SPS
Car Model: 2012 Chevrolet Volt European model What went wrong: I’m an owner of early 2012 Chevrolet Volt (very likely with retrofitted coolant sensor). […]
Clear Opel SHVCS Fault by VXDIAG VCX NANO & Service Box
Another review on Opel module programming using vxdiag vcx nano opel and PSA service box. Using Win 10 64bit Got the VXDIAG VCX Nano, […]
Program Opel Ampera Modules with VXDIAG VCX NANO & Service Box
Problem: I got P0AA6 (insulation) P1FFF (both for level and insulation) and the one to turn on the MIL, forget what that one is at […]
How to Install and Activate VXDIAG PSA Diagbox 9.85 Software?
Download, Install and activate Peugeot Citroen DS diagbox 9.85 software for VXDIAG PSA diagnostic scanner. Free download Diagbox 9.85 and PSA VCI Driver for […]
VXDIAG VCX SE PSA Diagnox VCI Not Found?
Problem: I got the PSA diagnox license activated to the vxdiag vcx se unit. After installing diagbox 9.150 and PSA driver in vx manager, when […]
Can I Downgrade VXDIAG VX Manager to 1.6?
Question: Hi is there a way to downgrade my vxdiag vcx se version to 1.6 and back to new version without loosing my license or […]
VXDIAG PSA Diagbox vs Lexia3
What’s the difference between VXDIAG PSA and Lexia3 diagnostic interface for Peugeot Citroen DS? Item VXDIAG PSA Lexia3 original or clone Software Diagbox PP2000 Diagbox […]
How to Activate PSA Peugeot Citroen License to VXDIAG?
PSA Peugeot Citroen DS software has been tested working with vxdiag diagnostic tools. PSA software license is available now. How to add PSA License […]
ODIS V23 Crashes After Installing VXDIAG 6154 Driver?
Problem: ODIS Service 23 and Engineer V17 crash after Vxdiag VAS6154 driver gets installed. It stops and disappears from the screen after a few seconds […]
Can I Use VXDIAG VCX SE with Chrysler wiTech 2.0?
Question: Can I use VXDIAG VCX SE as a Passthru device for Chrysler wiTech 2.0? Some people tested working with witech 2.0. Some J2534 devices […]
How to Install VXDIAG GM GDS2 2023.10.19 and Tech2win?
How to install VXDIAG VCX NANO GM/VCX SE/VCX DoIP GDS2 2023.10.19 and Tech2win software? Software including: DPS 4.52 GDS2 2023.10.19 Tech2win VX Manager […]
VXDIAG VCX NANO Cannot See Any License Solution
If there is no license can be found in vxdiag scanner vx manager after updating firmware and license, here is the solution. Solution: Disconnect vcx […]
VXDIAG GDS2 Software V2023.10.19 Free Download
VXDIAG 2TB hard drive GDS2 software update to V2023.10.19 (Oct. 31st, 2023). This update can be applied to vcx doip, vcx se and vcx […]