Ways of using original factory software with our vxdiag product
Take JLR SDD as example:
I. Install VX Manager
II. VXDIAG Connection
Connect OBD-II cable to the vehicle 16-pin diagnostic port, and USB cable to the PC
VXDIAG connection diagram
The first time connect VXDIAG, you need to install USB driver.
The products have been installed USB driver, you neet to connected VXDIAG, then go to The Next Step
III. Buy License and Update
The products have been Update License, you can go to The Next Step.
IV. Installation OEM Driver
Click [Diagnostic Apps] tab on VX Manager software interface, then click [My Apps]
Click [JLR SDD] and you will get a driver installation window, then click [Install]
If JLR SDD have been installed, then click [Update] to Update JLR SDD driver.
“Install Complete” click [close]
V. run Original Factory Diagnosis Software
Click [Diagnostic Apps] tab on VX Manager software interface, then click [My Apps]
Click [JLR SDD] and you will get a window, then click [Run] to run JLR SDD diagnosis software.
