Question:
How to do throttle body adaptation via SDD? Which function is responsible for it in JLR SDD? Can’t find it.
Or is there other way to do it?
Answer:
It’s air path setup.
Air path setup resets all the fully open and closed positions of all the air shut off valves in and around the turbo system ie wastegate, egr valve and throttle valve.
Air path setup require you to run the engine.
1st time to check engine temp (min 10C), switch off and then it does reset egr/throttle and then engine on 2nd time for turbo valves reset.
Used the SDD program and found the “Run the Air Path Calibration” routine located under Service Functions > Recommendations > Powertrain (section) > Powertrain – Air path set-up routine >Run.
DTC codes cleared.
www.vxdiagshop.com