This is icom a2 emulator alternative: VXDIAG VCX SE for BMW
It’s designed for diagnosis, programming and coding for all for BMW E/ F/ G series cars
Works as well as ICOM A2 or ICOM NEXT with BMW ISTA-D, BMW ISTA-P, BMW Group ISPI, E-SYS, WINKFP, Tool32, INPA, KSD2 and NCS-Expert, etc.
source: http://www.vxdiagshop.com/wholesale/vxdiag-vcx-se-bmw-with-hdd.html
It is good because:
- it can works as good as original bmw icom
supports online programming, LSAT part drawing, brush hiding
original BMW software compatible:
Diagnostic programming system ISTA
SDP programming database
BMW Group ISPI (the fourth generation of For BMW diagnostic software client);
E-SYS (Engineer Software for F series, available for programming, coding, Chinesization, realize hidden functions, Advanced features);
WINKFP (for E series: programming, upgrade and downgrade);
Tool32 (enter key, import codes, delete certification, advanced features of For BMW series);
INPA (read vehicle information, diagnosis, read and clear trouble codes);
For BMW Coding (for E series: import data, change the code or realize hidden functions);
KSD2 (offer full vehicle repairing information for diagnosis or programming);
NCS-Expert tool (for E series: set codes, realize hidden functions and change settings);
- Small and portal
- Support A3 and can be updated all the time
- Cover a lot of functions
– ecu update programming, coding, change vehicle configuration vo, import vehicle FSC activation code
– matching control unit set codes, change vehicle configuration and activation code, delete hidden function
– import/export data software
– flash programming of control unit
– ecu version update and downgrade, ecu repair after isss programming failure
– manual input parameter reading module, reset fault software/hardware number
– vehicle diagnosis, delete fault codes, read vehicle data
– brush hiding features, circuit parts drawing query, accessories query, etc.
- It’s powerful, can be used as ICOM A2, ICOM A3, ICOM NEXT, and VXDIAG BMW
- Good vehicles compatible
Works for vehicles from 2004 to 2018
- Application scenario
Customization:
1. Set Seat Belt Alarm time (second/sec)
2. Disable passenger Seat Belt Alarm
3. Disable driver Seat Belt Alarm
4. Set the engine on/off status the same as that before the ignition off or the default status off.
5. Set the central lock automatically unlock when ignition off
6. Set Fuel Economy Mode as default mode after ignition on
7. Enable roll up window when open car door
8. Enable the option of DRL (Day Running Lights) on or off.
9. Set Highlight auxiliary and intersection traffic light “Automatic”
10. Enable to adjust DRL brightness (the default factory setting is brightest)
11. Set fog light turn on while headlight is on
12. Enable to Lock/Unlock sound and adjust the volume
13. Enable auto close sunroof when raining (May lead to initialize sunroof, it will work only after ignition on for 10 seconds, not very effective.)
14. Set windshield wiper Back in place when ignition off
15. Set sunroof automatically close in a tilted state (It needs to initialize sunroof)
16. Set the turn signal light on/off times (F30)
17. Enable CIC menu display CI version
18. Three Bluetooth phone rings available
19. Enlarge phone number and text storage (25 to 50)
A/C (Automatic Air Conditioning)
20. Set indoor internal circulation memory the same as that when the ignition off last time.
21. Set air conditioning memory the same as that when ignition off last time.
22. Display engine output power and torque on navigation screen
23. Cancel home screen boot delay confirm message
24. Cancel rear view camera statement when reversing
25. Display available gas station on navigation
26. Display speed limit info (Need hardware support)
27. Display engine torque menu
28. Auto headlight
29. TPMS
30. Display tire pressure and temperature (Need hardware support)
31. Adjust mile to kilometer
33. GPS time synchronization
34. Dashboard stimulate instant fuel consumption: change from 20 to 30
35. Enable dashboard light on always
36. Enable dashboard light always on at night (For For BMW 535, GT, 7 series and part of For BMW 530)
37. Enable dashboard light always on at daytime (For For BMW 535, GT, 7 series and part of For BMW 530)
38. Enable dashboard lights turn grey (For For BMW 535, GT, 7 series and part of For BMW 530)
39. Enable dashboard lights turn orange or grey (For For BMW 535, GT, 7 series and part of For BMW 530)
40. DS Mode display current shift from S1 to S7
41. Set Head-Up Display (Navigation map distance and turn signal, etc.) (Need hardware support)
42. PDC reversing radar is changed vertically and horizontally