New VX Manager Adds DoIP Options and Device Auto Connection

As titled, the new version VXDIAG VX Manager adds VCX DoIP options (DoIP update, DoIP firmware update, DoIP switch etc)  and auto connection features. Check detail information below.

 

Current VCX DoIP devices available: VXDIAG JLR DoIP, VXDIAG VCX-DoIP Porsche Tester III

Double-click to open VX Manager 1.4.2.0927 setup

Accept license agreement

vxdiag-vx-manager-1
Select software driver you need to install
Here we select Passthru and JLR software
Installing the VX Manager setup

vxdiag-vx-manager-2

vxdiag-vx-manager-3

vxdiag-vx-manager-4

Installation completed.

vxdiag-vx-manager-5

Finish installing the setup

 

Connect VXDIAG VCX DoIP with computer

vxdiag-vx-manager-6
Run VX Manager on desktop

vxdiag-vx-manager-7
Check device serial number, driver info.

vxdiag-vx-manager-8
You don’t need to configure the connection, it is auto connected

vxdiag-vx-manager-9
Check diagnostic software available
New VX Manager gives you DoIP options, ie, DoIP update, DoIP Switch

vxdiag-vx-manager-10
For example: DoIP Update

vxdiag-vx-manager-11
Press “Connect” button to check if there is a new update
The current version is the latest, don’t need to update

vxdiag-vx-manager-12
You are able to update VCX DoIP firmware as well

vxdiag-vx-manager-13
Press “Update License” if you have new software activated by vxdiagshop engineer successfully.
(This function needs internet connection).