VXDIAG SUBARU

VXDIAG SUBARU

Product Outlook:

SUBARU SSM-III-SCANNER

Compatibility:

Can Pay to Add Ford/Mazda, GM, Toyota, Honda, Porsche, JLR to the this Device
Fully Compatible with SAE-J2534

Supported models: SUBARU till the 2015 year, both 12V and 24V Gasoline and Diesel Car

Note:

For 2015.10 version, there is only English and Chinese, if you want German, Spanish, French, Italian, contact us to give you a 2015.01 software link.

While installation, you need to install both SSM3 and SSM4, run the SSM4 first   and then use the SSM3 to do the function you want.

With VXDIAG scanner and SSM III software, what can you do?

SUBARU SSM-III-main-menu

  1. All System Diagnosis.
    Selecting this item displays on a single screen the fault detect status of all control system control modules for which SSMΙΙΙ diagnosis is supported, and memorized diagnostic codes.
  2. Each System Check.
    Selecting this item makes it possible to select a particular system from among the control systems forwhich SSMΙΙΙ diagnosis is supported, and perform fault diagnosis.

This item can be used to view input/output data of the system control modules that perform fault diagnosis, memorized diagnostic codes, and other data on the PC display. This menu item is also used after repair work is complete to delete diagnostic codes, to configure control module settings, etc.

  1. Saved Data Display.
    This item can be used to save various data sampled during fault diagnosis operations, and to load data for viewing after work is complete.
  2. Immobilizer.
    This item performs immobilizer registration.
  3. Reprogram.
    This item performs reprogramming of the control module.
  4. Read CF application measurement data.
    This item performs reading stand alone measurement data saved in a CF card to hard disk of your PC.
  5. Convert/Save measurement data on driving recorder.
    Loads data sampled on the driving recorder to the PC from the CF card, and converts and saves that data.
  6. Oscilloscope.
    After attaching the optional pulse/analog cartridge to SDI, connect the pulse/analog box to the SDI and using pulse/analog probe to perform analog sampling.
  1. Can program Subaru smart key

www.vxdiagshop.com