VXDIAG VCX SE BMW works well with ISTA+, INPA, ESYS. Some may have trouble with detecton of car using INPA, Ediabas or E-sys with vcx se. Here’re some setting tips.
How to Configure INPA Ediabas E-sys for VCX SE BMW?
Turn on DoIP switch. Ensure the device has connected to car VIN. Always use DOIP to connect no matter what software tool you’re using.
The car can’t be seen without DOIP On. Use ediabas configurator 2.0 / easyconnect / or edit ediabas.ini.
Configure for remote 192.168.8.1 (works for either WiFi or USB). And try to open INPA. I had quite the experience with Tool32 and not INPA but should be the same principles.
If you want to simulate an ENET cable configure any of the above for ENET = 192.168.8.XXX. XXX being your car’s IP address. If you can connect to ista this should show in the connection window.
This should also be a choice I’m e-sys for connect to vin option. When you can connect to ista and e-sys but not one of the main base tools with an error net-009 time out it usually means there’s conflicting programs or tasks running still from other programs.
If nothing works run in command prompt as administrator:
netsh winsock release catalog
And restart your computer and unplug all network devices including the vxdiag vcx se for bmw.
Any questions feel free to contact www.vxdiagshop.com customer service.