Wondering if VXDIAG Benz C6 DoIP Allscaner is good and work ok for Mercedes Trucks and Buses at 24v with XENTRY XDOS 2019 or 2020? Someone already tested it and would like to share with you their experience.
Here we go for review:
For me was and it is ok, I was able to change HP on mp4 Actros 2012 and work with SCR, I did some comfort coding,
I didn’t work with another Mercedes car, only to truck also euro6!
This its the picture with connection with my truck its EEV and yes ,have 24 volts.
But if you buy must know you will have only 5 years support for firmware and drivers at least for openshell.
Vxdiagshop engineer official reply:
VXDIAG C6 work just on some 24v Mercedes Truck models not on all models this time (For example, C6 cannot work on AXOR with protocol Iso 9141-2., cannot work with DAS at lkw (actros MP2 / MP3)
They work for 24v Mercedes Trucks fully 100% support in the future but not this time and now.
This time till date Mercedes 12v work perfectly.