VXDIAG VCX SE with DTS Monaco DoIP Configuration

To add some information for those who wanna set up VXDIAG VCX SE Benz or Benz C6 with DTS Monaco 8.14 (most stable cause above may not work yet), you need to set up as described in the picture by adding new interfaces and enter the described parameters manually.

DoIP interface:

Interface name; ISO_DoIP-SMR

Bus system interface: D-PDU API

D-PDU API version: Bosch Automotive Service Solutions BOSCH-DS_D_PDU_API_FOR_DTS_8.13_029

Module type: MVCI_DAIMLER_DOIP_Collection

Cable: J1962-CARB

Tick use for licensing 

Physical links:
IEEE 802_3 (1 TX, 9 LOW, 12 RX, 13 MINUS) Ethernet 2
IEEE 802_3 (3 TX, 11 LOW, 12 RX, 13 MINUS) Ethernet 1

 

CAN Interface:

Interface name: VCI_DoIP

Bus system interface: D-PDU API

D-PDU API version: Bosch D_PDU_API_Bosch_MTS6532

Module type: Module_Type_ID_MTS6532

Vendor module name:87517478

Cable: OBD_STDCABLE_ONLY

Tick use for licensing 

Physical links:
ISO 11898 2 DWCAN (6 HI, 14 LOW) CAN 1

DTS DoIP Setup

Read also:

How to Set up DTS Monaco 8.16 with VXDIAG VCX SE Benz C6?