How to Set up DTS Monaco 8.16 with VXDIAG VCX SE Benz C6?

VXDIAG VCX SE Benz and C6 HDD come with DTS Monaco 8.13 version in default. DTS 8.16 has been tested by many without issue.¬† Here’s the tips to set up DTS 8.16 for vxdiag scanners.

 

We don’t provide DTS 8.16 software download nor activation service.

DTS 8.13 does not require activation and special setting. Direct run and go.

 

How to configure DTS Monaco 8.16 with VXDIAG?

First of all, let’s connect vcx.

Connect vcx se or c6 vci with laptop

Get your DTS 8.16 installed and activated

Run vx manager

Update Xentry VCI driver

Vxdiag Benz Dts Monaco 8 16 Install 1

Vxdiag Benz Dts Monaco 8 16 Install 3

Select Xentry VCI version according to your xentry version
if cannot find correct VCI version, leave it blank

Vxdiag Benz Dts Monaco 8 16 Install 4

Vxdiag Benz Dts Monaco 8 16 Install 5
Device is connected
Make sure you have Passthru and C6 driver well installed.

Go to the folder you downloaded and copy this file (slave)

Copy and paste slave file to C:/Program Files (x86)/Softing/Diagnostic Tool Set 8/8.16/Interfaces/DCDI30 folder

Vxdiag Benz Dts Monaco 8 16 Install 8

Run DTS Monaco 8.16

Vxdiag Benz Dts Monaco 8 16 Install 6

Open Adminisrate and manage DTS projects

Go to System settings- Interface CBF

Tick eCOM_CBF (DCDiPartP)

Vxdiag Benz Dts Monaco 8 16 Install 9

In Interface section, select VXDIAG (J2534) interface

Vxdiag Benz Dts Monaco 8 16 Install 10

Add new interface: VXDIAG
and select D-PDU API

Vxdiag Benz Dts Monaco 8 16 Install 11

Press Next
Complete following information

D-PDU API version: Bosch D_PDU_API_Bosch_MTS6532
Module: Module_Type_ID_MTS6532
Cable: OBD_STDCABLE_ONLY
Vendor module name: 87517478
Tick Use for licensing
Save setting

Vxdiag Benz Dts Monaco 8 16 Install 12

Vxdiag Benz Dts Monaco 8 16 Install 13
VXDIAG will work in C6 mode.

www.vxdiagshop.com